English
русский
Tiếng Việt
The Complete Air Compressor Guide:
Types, Parts, Operation & Maintenance
From oil-free scroll units to industrial rotary screws — everything engineers, facility managers, and buyers need to know about compressed air systems.
What Is Compressed Air and What Do Air Compressors Do?
Compressed air is atmospheric air that has been pressurised above 14.7 psi (1 bar) by a mechanical device. Air compressors convert mechanical energy into pneumatic energy, storing it as pressurised air that can be released on demand to power tools, actuate cylinders, spray coatings, or support medical and industrial processes.
In thermodynamic terms, compression raises both pressure and temperature according to the ideal gas law. Most industrial compressors operate on one of three thermodynamic cycles: isothermal (constant temperature, most efficient theoretically), adiabatic (no heat exchange, real-world default), or polytropic (a practical blend of the two).
Types of Air Compressors: A Direct Comparison
Choosing the wrong compressor type is the most common and costly mistake. The table below covers all major types.
| Type | Working Principle | Pressure Range | Best Application |
|---|---|---|---|
| Rotary Screw | Two meshing helical rotors trap and compress air | 80–200 psi | Continuous industrial use, manufacturing |
| Reciprocating | The piston moves in the cylinder to compress air | 100–6,000 psi | Intermittent duty, workshops |
| Centrifugal | High-speed impeller accelerates and diffuses air | 15–150 psi | Very large volumes (>500 hp), petrochemical |
| Oil-Free | PTFE/water-injected or dry screws | 100–150 psi | Medical, food & beverage, electronics |
| Scroll | Two spiral scrolls orbit to compress air | 80–145 psi | Labs, dental, low-noise environments |
Rotary Screw Air Compressors: The Industrial Workhorse
Rotary screw compressors account for over 70% of industrial compressed air installations globally. Atlas Copco's GA series screw compressors range from 5 kW to 900 kW. Key advantages include:
- 100% duty cycle — designed to run 24/7 without overheating
- Lower sound levels (60–75 dB) versus reciprocating types (85–95 dB)
- Variable-speed drive (VSD) versions reduce energy consumption by up to 35%
- Oil-flooded variants deliver air at 7–13 bar; oil-free variants meet ISO 8573-1 Class 0
Oil-Free Air Compressors: When Purity Is Non-Negotiable
Oil-free compressors are mandatory wherever even trace oil contamination causes product loss or safety risk — pharmaceutical filling lines, semiconductor fabs, and food packaging. ISO 8573-1 Class 0 means oil content is verified below 0.01 mg/m³.
Three main oil-free technologies
- PTFE-coated dry screws: No lubrication in compression chamber; most common in 15–315 kW range
- Water-injected screws: Water replaces oil for sealing and cooling; produces very clean, cool air
- Scroll compressors: Inherently oil-free by design; ultra-quiet at 40–65 dB; preferred for labs and clinics
Note: oil-free units typically cost 20–40% more upfront than oil-lubricated equivalents but eliminate downstream filtration costs.
Centrifugal Air Compressors: High-Volume, Continuous Flow
Centrifugal (turbo) compressors use a high-speed impeller — often spinning at 20,000–60,000 rpm — to impart kinetic energy to air, which is then converted to pressure in a diffuser. They are inherently oil-free in the compression path and excel at very high flow rates (typically above 200 cfm). Common applications include large HVAC systems, steel mills, and natural gas processing.
Their main limitation: centrifugal compressors are sensitive to "surge" — aerodynamic instability at low flow — and require precise control systems to stay in their operating envelope.
Medical Air Compressors: Stricter Standards, Higher Stakes
Medical-grade air must meet HTM 02-01 (UK), NFPA 99 (USA), or ISO 7396-1 (international) standards. Key requirements:
- 100% oil-free compression (scroll or dry-screw type)
- Dedicated drying to a dew point below −40 °C
- Duplex (N+1) configuration for zero downtime
- Continuous CO and O₂ monitoring at the point of use
- Delivered pressure of 4–5 bar (58–73 psi) at the ward outlet
Medical air is used for ventilators, surgical tools, and driving anaesthetic delivery systems — never substitute with industrial-grade air.
Parts of an Air Compressor: What's Inside
| Part | Function | Failure Symptom |
|---|---|---|
| Air Filter | Removes dust before compression | Overheating, reduced flow |
| Compression Element | Raises pressure via pistons, screws, or impellers | Pressure drop, noise |
| Electric Motor | Drives the compression element | Won't start, trip breaker |
| Receiver Tank | Stores air, dampens pressure swings | Short-cycling, pressure spikes |
| Aftercooler | Cools compressed air, condenses moisture | Wet air downstream |
| Pressure Switch | Starts/stops unit at set pressure band | Continuous run or no start |
| Safety Relief Valve | Vents air if pressure exceeds the safe limit | Constant venting, over-pressure |
| Dryer | Removes water vapour from compressed air | Rust in lines, tool damage |
Air Compressor Overheating: Causes, Consequences, and Fixes
Overheating is the leading cause of unplanned compressor shutdowns. Most units trip at 100–110 °C (212–230 °F). Common root causes:
- Blocked air filter — replace every 2,000 operating hours
- Dirty oil cooler — fin fouling cuts cooling capacity by up to 40%
- Low oil level — oil provides 80% of cooling in flooded-screw designs
- High ambient temperature — most compressors rated for ≤40 °C (104 °F) inlet
- Thermal bypass valve stuck open — causes oil to bypass the cooler entirely
Repeated overheating accelerates oil breakdown, degrades seals, and can permanently score screw rotors — a rebuild costing thousands of euros.
Thermodynamics of Compression: Why It Matters Practically
Compression always generates heat. For a single-stage unit compressing from 1 bar to 7 bar, discharge air temperature can reach 180–220 °C before aftercooling. Two-stage compression with intercooling reduces this significantly, lowering energy consumption by 10–15% for the same final pressure.
The specific power (kW per m³/min) is the key efficiency metric. A good oil-flooded screw compressor achieves 5.5–7.0 kW per m³/min at 7 bar. Oil-free units consume 10–15% more energy for equivalent output due to higher internal leakage.
Up to 94% of compression heat can be recaptured via an oil/water heat exchanger to pre-heat process water — a practical energy saving that many facilities overlook.
FAQ: Air Compressors
What size air compressor do I need?
Add up the cfm demand of all tools you'll run simultaneously, then add a 25–30% safety margin. Rule of thumb: 1 gallon of tank per 1 cfm of demand for intermittent use.
How often should I change compressor oil?
Mineral oil: every 1,000–2,000 operating hours. Synthetic oil: every 4,000–8,000 hours. Always follow the OEM specification — wrong viscosity is a common cause of bearing failure.
Can I use a regular compressor for medical use?
No. Standard compressors do not meet ISO 8573-1 Class 0 or medical-gas standards. You need a certified oil-free unit with validated monitoring.
Why does my compressor keep overheating?
Check in order: (1) air filter condition, (2) oil level and quality, (3) cooler cleanliness, (4) ambient temperature and ventilation, (5) thermal bypass valve. Most trips are resolved by steps 1–3.
Oil-injected vs. oil-free rotary screw: what's the difference?
In oil-injected, oil seals, lubricate, and cool the rotors — it's removed downstream by a separator. In oil-free, PTFE-coated rotors run dry with no oil ever contacting the air stream, guaranteeing ISO Class 0 quality.
What routine maintenance does a compressor need?
Daily: drain condensate, check oil. Weekly: inspect air filter, check for leaks (a 3 mm leak at 7 bar wastes ~0.6 kW continuously). Every 2,000 hrs: change filters, oil separator. Annual: full service, including valve and controller calibration.
