How to choose and maintain an evaporator suitable for different storage temperatures?

Working principle of evaporator

1.The evaporation heat absorption effect of water

The evaporator is the core component of the air cooler system, and its working principle is based on the evaporation heat absorption effect of water. When air passes through the wet curtain, the moisture on the surface of the wet curtain evaporates, absorbing heat from the air to achieve a cooling effect. This process utilizes the physical property that water needs to absorb a large amount of heat when evaporating, which significantly reduces the air temperature.

2.Cooperation between fan and wet curtain

The fan plays a vital role in the evaporator. The operation of the fan generates negative pressure, allowing hot air to pass through the wet curtain. The water film on the wet curtain forms a thin and uniform water layer under the action of the fan, which accelerates the evaporation process of water. The cooperation between the fan and the wet curtain ensures full contact between the air and the water film and improves the evaporation efficiency.

3.Factors affecting evaporation efficiency

The working efficiency of the evaporator is affected by many factors, including wind speed, evaporation area and relative humidity. The lower the wind speed, the longer the contact time between air and water film, and the better the evaporation effect; the larger the evaporation area, the more total water evaporated, and the more significant the cooling effect; the lower the relative humidity outside, the easier it is for water to evaporate, and the better the cooling effect.

4.Different types of evaporators

Evaporator Manufacturer designs and produces a variety of series of evaporators according to different working temperatures and application scenarios, such as DJ low-temperature evaporators, DD medium-temperature evaporators, and DL high-temperature evaporators. These evaporators are suitable for different storage temperatures, ensuring that ideal cooling effects can be achieved in various environments.

How to clean the wet curtain to maintain the evaporation efficiency of the evaporator

1.Turn off the power to ensure safety

Before cleaning the wet curtain, the power of the Evaporator should be turned off to ensure safe operation. Avoid cleaning while the equipment is running to prevent electric shock or other safety accidents.

2.Use a soft brush or soft cloth to clean the surface

Use a soft brush or soft cloth to gently wipe the surface of the wet curtain to remove dust and dirt on the surface. The microporous structure of the wet curtain is prone to accumulate dust, dirt and other impurities during long-term use. These impurities will clog the pores, affect the uniform distribution of water and the circulation of air, and reduce the evaporation efficiency.

3.Use mild detergent to clean stubborn stains

For stains that are difficult to remove, you can use a mild detergent for cleaning. But be careful not to use highly corrosive chemicals to avoid damaging the wet curtain material. After cleaning, the wet curtain should be thoroughly rinsed to ensure that the detergent is completely removed, and then dried before reinstalling.

4.Regular inspection and replacement of wet curtains

Regularly check the pore structure and moisture distribution of the wet curtain to ensure that it is in the best condition. If necessary, replace the wet curtain with a new one to ensure the long-term and efficient operation of the evaporator. Regular replacement of the wet curtain helps maintain the performance of the evaporator and extend its service life.

Role of Evaporator Manufacturer

1.Design and production of a variety of series of evaporators

Evaporator Manufacturer designs and produces a variety of series of evaporators according to different operating temperatures and application scenarios, such as DJ-type low-temperature evaporators, DD-type medium-temperature evaporators, and DL-type high-temperature evaporators. These evaporators are suitable for different storage temperatures, ensuring that ideal cooling effects can be achieved in various environments.

2.Focus on product performance and quality

Evaporator Manufacturer focuses on product performance and quality, using advanced manufacturing processes and strict quality control systems to ensure that each evaporator can meet high standards of performance requirements. High-quality evaporators can provide stable cooling effects and meet the different needs of users.

3.Provide detailed use and maintenance guides

Evaporator Manufacturer provides users with detailed use and maintenance guides to help users properly operate and maintain evaporators. These guides cover the installation, use, cleaning and maintenance of the equipment to ensure that users can fully utilize the performance of the evaporator.

4.Regular technical support and after-sales service

Through regular technical support and after-sales service, Evaporator Manufacturer ensures that the evaporator remains stable and efficient in long-term operation. They provide professional technical support, answer questions encountered by users during use, and provide timely repair and maintenance services to ensure the normal operation of the evaporator.